Once we first gutted our laundry room all the way down to the studs, drywall appeared like the apparent subsequent step. It’s what we’ve all the time finished. However as we stared at these naked studs, tape measures in hand, it dawned on us that drywall wasn’t really our greatest possibility.
In a room this tight, each inch counts. Including drywall would’ve stolen helpful area from our cupboard structure, and if you’re already attempting to squeeze storage right into a slender laundry room, two inches is like gold.
On high of that, we had been method not on time and the considered drywall sanding made my eyes twitch. For those who’ve ever lived via that mud, you understand it lingers in your own home for weeks.
That’s when beadboard got here into the image. We realized it might clear up all of our issues directly:
- It’s thinner than drywall, so we wouldn’t lose cupboard area.
- It installs rapidly with out the mudding, taping, or tons of sanding.
- And better of all, it immediately provides that classic cottage attraction we love.
So beadboard it was. And truthfully? It might need been the most effective DIY choices we’ve ever made.
Associated: DIY Shiplap Ceiling With Crown Molding
Associated: How one can Set up DIY Stair Wainscoting the Simple Manner
How We Put in Our Beadboard Wall
Step 1: Measuring and Slicing
We measured the wall top, marked it on the panels, and minimize them to dimension. A round noticed dealt with the large cuts, and a jigsaw labored completely round shops. Nothing fancy, simply easy cuts that got here collectively surprisingly rapidly.
Step 2: Prepping the Wall
Earlier than hanging the primary panel, we used a stud finder to mark out the studs with a pencil. This step is vital as a result of the nails must seize into stable wooden, not simply open area.
Step 3: Putting in the Panels
We unfold building adhesive on the again of the panel, pressed it towards the studs, and adopted up with ending nails alongside the traces we marked. The primary panel clicked into place so simply. By the tip of the afternoon, we had all of the partitions coated.
Associated: Cheap DIY Batten Wall Utilizing Lattice Strips
Step 4: Caulking the Seams
The beadboard itself regarded nice straight away, however caulk is what makes it look seamless. We ran a bead of caulk within the corners and the place panels met, smoothed it with a finger, and abruptly all of it regarded intentional, prefer it had all the time been there. Then we simply coated nail holes with wooden filler and sanded clean.
Associated: DIY Fake Wall Planking for $20
Step 5: Portray for the End
As soon as the caulk dried, we rolled on a coat of paint to match the trim. The vertical traces of the beadboard gave the entire area extra top and character.
Why We’d Select Beadboard Once more
This challenge was precisely what we would have liked in the midst of a chaotic transform, quick, inexpensive, and immediately charming. Skipping drywall saved us time, area, and an entire lot of cleanup. It’s formally my favourite DIY shortcut. As an alternative of a plain field of a room, our laundry room has a wall remedy that feels traditional and customized.
Associated: DIY Fake Brick Partitions
Generally as DIYers, we be taught the arduous method that the “simple” route isn’t really simpler. However on this case, the shortcut actually was the smarter path. Beadboard gave us the look we needed with out the headache, and I’d select it over drywall once more in a heartbeat.
