Saturday, April 19, 2025

Jewellery Drawer Inserts (A DIY Fail + An Straightforward Answer)

A few days in the past, I confirmed y’all the jewellery drawer with the glass prime that I inbuilt my walk-in closet. It’s a reasonably large drawer with inside dimensions of 41 5/8″ x 15″.

And it has a glass countertop over it in order that every part exhibits when the drawer is closed.

I had checked out all types of choices for jewellery drawer inserts, from Amazon choices to {custom} choices. I had actually hoped to have one thing {custom} made for the drawer, however I in a short time realized that wasn’t going to be an choice for me. I discovered one web site the place you may design your personal, however first, their {custom} choices solely went as much as 36″ vast. And if I’m going to spend cash on one thing {custom} made, it wanted to suit your entire drawer width.

However I began enjoying round with their on-line customizer simply to get an concept of the value of one thing like that. Let’s simply say I ended designing (i.e., I ended including compartments to the design) when the value surpassed $500. There’s simply merely no means I can justify paying over $500 for a custom-designed jewellery drawer insert after I’m simply storing cheap jewellery. If I have been a collector of high-quality jewellery, I may most likely justify spending that a lot to show it. However actually, the one costly piece of knickknack I personal is my marriage ceremony ring. All the things else is simply cheap, enjoyable jewellery that I purchase at random locations–drug shops, Interest Foyer, Amazon, and many others.–after I see one thing I like.

So then I believed that I may construct my very own compartments. That means, I may construct it to suit the exact dimensions of the drawer. So I picked up just a few of those poplar boards from Residence Depot. These are 2.5″ x 48″.

And so they’re 1/4″ thick, which I believed made them good for this undertaking.

My concept was to tear them down to three/4″ strips, reduce them to the lengths wanted, and construct a grid contained in the drawer. Then I needed to stain the within of the drawer, in addition to the grid, in a really gentle, heat brown stain coloration.

However it didn’t take lengthy for me to appreciate that I’d by no means get these items collectively excellent in a means that I used to be glad with. I attempted placing them along with sizzling glue, however I couldn’t use sufficient glue to maintain them collectively. If I used an excessive amount of glue, it could squish out the perimeters, after which these items wouldn’t settle for stain. If I used too little, they wouldn’t maintain collectively. I additionally tried utilizing wooden glue, however that dries so slowly that I’d mess up the primary part as I began making an attempt to assemble the second part.

However this wasn’t a kind of tasks. With the entire huge tasks that also should be finished within the walk-in closet (like portray the cupboards and constructing the middle island), the very last thing I needed to do was spend my time doing this random time-consuming undertaking that I used to be about 95% positive I wouldn’t even be glad with when it was completed.

Again on-line I went. I’ve to confess that for about an hour final evening, I went again to the concept of a {custom} insert. I used to be really very tempted when I discovered this firm that can do {custom} acrylic inserts for almost any goal you may consider. There are occasions when paying a excessive worth for one thing is well worth the comfort to me. However once more, due to the dimensions of the drawer, I knew I’d be a worth of a number of hundred {dollars}. I simply couldn’t make myself do it.

So final evening, I searched excessive and low on Amazon for inserts that I believed would possibly work in my drawer. I couldn’t discover the right dimension (not stunning), however I lastly determined to go along with this set of 4 in a light-weight grey (affiliate hyperlink). Every set comes with 4 completely different grid sizes.

I knew that I needed two of the identical dimension since most of my earrings are fairly small. And I wasn’t positive what different dimension(s) I needed to make use of, so I ended up ordering two units. (I LOVE Amazon in a single day supply!! Hooray for instant gratification! I ordered earlier than I went to mattress, and it was on my doorstep after I awoke. 😀 )

The colour is barely darker than I had hoped, however they’re very effectively made and durable.

4 of them match into my drawer, and my plan is to paint match a pattern dimension of paint to the grey in order that I can paint the entire inside the drawer in the identical coloration.

I’m really fairly enthusiastic about how they appear! They’re not an ideal match, but it surely positive beats the heck out of paying over $500 for a {custom} insert.

Even with shopping for two units, I nonetheless paid means underneath $100 for them.

There’s a 1-inch hole on the entrance, however that doesn’t even present when the drawer is closed. In order that doesn’t trouble me in any respect.

And since I’ve 4 trays left over, I’m contemplating making an attempt to chop down one of many further trays (the grids are detachable) to fill within the further 3.5-inch area within the center to get a totally custom-made dimension and have the entire drawer, from left to proper, full of trays. I do not know if I can do it, however you could be sure that I’ll strive!

Anyway, I’m more than happy with how that is turning out. I believe as soon as I get the within of the drawer painted to match the trays, it’s going to look improbable! And naturally, I nonetheless plan so as to add tape lights contained in the drawer and contained in the necklace compartment as effectively.

I’m additionally nonetheless making an attempt to work out the small print of how I need to end off the necklace pull-out storage. Y’all had some nice concepts on that, so I’m nonetheless weighing the choices.

 

 

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest Articles