On this tutorial I’m going to point out you The right way to Make a Sliding Quilt Design Wall Utilizing sliding closet {hardware} and foam insulation boards.
For those who’re like most quilters, discovering sufficient area to structure your quilt blocks is usually a problem. A design wall is an ideal resolution, permitting you to rearrange and rearrange your blocks till the design is excellent.
However what in case your stitching room is small, otherwise you want that wall area for storage or different functions? A sliding quilt design wall is likely to be simply the reply you’re on the lookout for!
This challenge offers you a practical, movable design wall that doesn’t take up treasured flooring area—good for small or multipurpose stitching areas!
Need an ad-free, printable copy of this tutorial? Scroll to the underside of this submit for extra particulars!
Supplies:
- Sliding Closet Door {Hardware}
- Is available in a equipment with rails, curler tracks, rollers, and {hardware}.
- Out there in numerous lengths. We used two for our utility, however get as many as you want, in no matter lengths wanted on your utility.
- Out there at most residence enchancment shops.
- 4′ x 8′ x 1″ Foam Insulation Boards
- Two used for our utility.
- Lower to size and width as wanted.
- Out there at most residence enchancment shops.
- (2) 1/4“ plywood strips reduce to 4″ x 48″ (vast or the completed width of your foam boards).
- The plywood strips are glued to the higher again fringe of the froth board in order that the sliding door {hardware} has one thing stable to screw into.
- Out there at most residence enchancment shops.
- Liquid Nails or different robust adhesive
- For attaching plywood strips to foam boards.
- Out there at most residence enchancment shops.
- (2) Bolts
- Put in on the ends of the rails to function stops for the froth boards so that they don’t unintentionally roll off the ends.
- Out there at most residence enchancment shops.
- Light-weight batting or flannel
- Get sufficient to cowl the entrance of every panel and have 4″ obtainable on either side for wrapping to the again and securing to the froth board.
- Flannel is healthier for adherence. Search for 60″ vast flannel to wrap across the foam insulation boards.
- Batting is an efficient various, however issues will have to be pinned to remain put.
- Spray adhesive or a stapler (for securing material to the froth insulation boards)
- We used a stapler and put duct tape over staples.
- Instruments for putting in the {hardware}
- Measuring tape and stage
- Utility knife (for reducing the froth boards to dimension if wanted)
Step 1: Set up the Sliding Closet {Hardware}
Begin by measuring your wall area to make sure you buy the fitting dimension sliding closet {hardware}. These kits normally include tracks that mount to the ceiling or higher wall, permitting the doorways (or on this case, your design wall) to slip easily backward and forward.
Comply with the directions that include the {hardware} equipment to put in the tracks securely. Ensure that to make use of wall anchors if you happen to aren’t drilling instantly into studs. Use a stage to make sure the tracks are straight earlier than securing them in place.
Notice: Sliding door rails might be connected on to the ceiling, or connected as they’re on the highest of our cupboards (further {hardware} required to do that).
Step 2: Put together Your Foam Boards
Subsequent, it’s time to prep your foam boards. These would be the base on your quilt design wall. Relying on the dimensions of your area, you might want to chop the froth boards to suit. Use a utility knife and a straight edge to get clear, even cuts.
TIP: We had a 3rd foam board that we reduce down and connected to the underside of every panel to make them flooring to ceiling size. As a result of the rails are close to the ceiling, including this extra piece permits me so as to add to the design wall with out having to face on a stool.
IMPORTANT: Take the 1/4″ plywood strips and glue them to the higher again fringe of the froth board in order that the sliding door {hardware} has one thing stable to screw into.
Step 3: Connect the Cloth to the Foam Boards
When reducing the material or batting, you should definitely permit no less than 4″ on all sides. This permits sufficient material or batting to wrap across the again of the froth boards for securing.
There are a number of completely different strategies to safe the material to the froth boards, however the best is to make use of spray adhesive. Spray the adhesive evenly throughout the froth board, then gently clean the material excessive, guaranteeing there aren’t any wrinkles or bubbles. Begin from one finish and work your approach throughout to make sure a clean end. Notice: Spray glue will work effectively however it doesn’t permit a lot room for adjusting.
Alternatively, you’ll be able to staple the material to the again of the froth board if you happen to desire a no-glue choice. Simply pull the material tight and, on the again, safe it each few inches with a staple gun, working your approach across the edges of the board. That is what we did and we additionally added duct tape to ensure the material stayed put.
Step 4: Hold the Foam Boards on the Sliding {Hardware}
As soon as your material is secured to the froth boards, it’s time to hold them!
IMPORTANT NOTE: Comply with the instructions within the closet door equipment for attaching the {hardware} to the panels and hanging the panels to the rail.
Elevate the froth boards into place and grasp them by the {hardware} (rollers) to the sliding observe. Check the motion of the boards to make sure they roll easily from side-to-side and there aren’t any obstacles in the way in which.
Within the picture beneath you’ll be able to see how this works. The duct tape is there to assist the staples keep within the foam board. Spray glue will work effectively however it’s somewhat tougher to work with.
Step 5: Ideas for Utilizing Your Sliding Quilt Design Wall
Your sliding quilt design wall is now prepared on your subsequent quilt!
• All the pieces is movable: The froth boards simply come off and could be saved beneath a mattress or behind a closet till your subsequent challenge.
• Layer a number of boards: In case you have a big quilting challenge, you’ll be able to set up a number of foam boards on separate sliding tracks, supplying you with much more design area. Keep in mind, they are often arrange side-by-side or one behind the opposite – relying on which rail the froth board is connected.
• Set up your blocks: Preserve blocks for various tasks separated by sliding the boards out of sight when not in use.
Optionally available Concept: In case your stitching room has sliding closest doorways you then would possibly take into account changing the picket doorways with foam insulation panels as described above. You’ve got a design wall with out having to vary or alter a lot within the area.
Conclusion
A sliding quilt design wall is a game-changer for any quilter, providing versatility and space-saving performance. This DIY challenge is an effective way to optimize your stitching area and hold your tasks organized and visual whereas liberating up precious wall area.
Through the use of sliding closet door {hardware} and foam boards, you’ll be able to create a design wall that simply strikes out of the way in which when not in use, permitting you to get pleasure from your stitching room to its fullest potential.
Completely satisfied quilting, and I hope this challenge brings extra pleasure and ease to your quilting adventures!
>>> Desire a printable model of the submit? Click on the button beneath and be taught concerning the Printable Submit PDF for this tutorial.
